Leak protection system "Gidrolock"

Each of us at least once had to face such a problem as broken pipes in the bathroom, kitchen and bathroom. Most often this incident tells us about the impending loss of money, money and nerves. As the statistics show, damage to property caused by flooding 3 times gets used to damage to burglaries. When the bay you will meet a lot of losses: floors, walls, flooring, furniture, windows, doors and even household appliances.

Gidrolock will help you:

• keep good relations with neighbors;
• avoid litigation;
• save the new repair.

Stopping an accident at the earliest stage is the most effective way to protect yourself from accidents in the water supply and heating system. The engineering system Gidrolock is designed to automatically shut off the water supply in case of an accident in the water supply and heating systems.

The principle of operation of the system Gidrolock

If moisture hits the water sensor, the Gidrolock anti-leakage system will give a signal of an accident and automatically shut off the water supply with the help of ball electric drives.

The resumption of filing will occur only after the elimination of the accident.
Protection against leakage of water Gidrolock, is a leak prevention system that can be installed in apartments and country houses, public and office buildings, industrial and warehouse premises, boiler rooms and local heating stations, water treatment plants, water supply and heating systems, where leakage is possible water.

The leakage protection system (water leakage prevention system) consists of three main elements: water leakage sensors, a control unit, and electric ball valves designed for emergency shutdown of water.

The control unit is designed to generate the supply voltage of all sensors connected to it, control the spherical actuators and give an audible alarm about the accident. Sound alert is activated when the system detects a water leak. In the normal state, the beep is off.
Water sensors are installed in places where it is likely to appear: under the bath, sink, near the toilet or sink, under the washing machine and dishwasher, battery or heating boiler, boiler, etc. The system can control up to 20 rooms where there is a risk of water. Due to its small size (the height of the water sensor is only 8 mm), water leakage sensors can be placed in any places.
The electric ball valve is designed to shut off the water supply (heating) in case of a leakage. The spherical electric drive consists of the spherical crane and the electric drive intended for remote control of the spherical crane. Ball-type electric actuators are installed on the hot and cold water risers (or the heating system) after manual valves in places convenient for installation and maintenance.
Depending on the purpose of the system, spherical electric actuators come in different sizes. The 1/2 ”diameter ball motor is used, as a rule, for distributing hot and cold water around the house; 3/4 inch - for heating systems; from 1 to 2 inches - in centralized water supply systems or in boilers.
Installation of a water leakage system does not require serious intervention in the operation of water supply systems. The system can be installed both in the course of repair work, and upon their completion. But if you are doing repairs now, it is better to install a water leak detection system without delay.

Gidrolock equipment layout

Application of the Gidrolock system:

• Apartments in high-rise buildings.
• Country houses.
• Public and administrative buildings.
• Industrial premises and buildings.
• Warehouses and complexes.
• Dispatching systems of buildings and objects.
• Boiler and local heat points.
• Water treatment plants.
• Other rooms and buildings where there is a probability of an accident in the systems of water supply and heating.

The advantages of the system:

1. Easy installation.

Any plumber will be able to install electric ball valves. Their installation is no different from the installation of any ball valves. Due to the very detailed instructions to install and connect the sensors of flooding and the control unit will be able to specialist with minimal knowledge in the field of electricians.

2. Reliability and durability.

Gidrolock electric ball valves are made of high quality stainless steel and are designed for pressures up to 64 atmospheres. The seals are made of polytetrafluoroethylene and, in contact with the stainless steel ball, have virtually no wear. The resource of the ball valve with electric drive is more than 100 thousand open-closed cycles. The temperature resistance of the ball valve is 220 degrees Celsius.

3. Security.

All components of the system, except for the central control unit, operate at low supply voltage and are absolutely safe for humans and domestic animals. Ball electric actuators are supplied with a safe voltage of 12 volts only at the time of opening or closing, all the rest of the time they are de-energized. Water leakage sensors are powered by 5 volts.

4. Compactness.

Maximum dimensions that do not require special installation space.

6. Autonomy.

Independence from external power sources.

7. Scalability.

You buy only that part of the system that is needed to solve exactly your problem, increasing or decreasing the number of valves and sensors.

8. Warranty.

The Gidrolock flood protection system, purchased from an authorized dealer or representatives, is guaranteed for 48 months (there are no mandatory installation requirements by the seller’s representatives). Conditions for warranty repair or replacement - no mechanical damage to the system.