26. Safety in the performance of duties

In the manufacture of templates have to work with sharp-cutting tools: saw, chisel, plane, knife, scissors.

Before cutting, the profile board is best attached to the workbench, which creates greater convenience for work and protects your hands as much as possible from a cut with a knife or chisel. Cutting the steel profile with scissors, you should ensure that the sharp burrs left by the scissors on the metal, do not cut your hands. Cutting the profile with a chisel should wear goggles that protect the eyes from flying pieces of metal.

You need to hang the rules together. Suspended rules should be firmly fixed. When fastening with nails, it is necessary to bend the ends of the nails, as they are most often injured by the hands.

Decking on scaffolding or scaffolding in areas where plasterers go during work should be checked; all protruding nails are clogged or bent; the ends of the boards should be joined buttly and not overlapped.

It is not recommended to shake off the solution from the templates in the box in order to avoid its contact with the eye. The solution from the template is cleaned with a tool.